Okay, folks, let’s dive into this “rubber dancing birch assembly wooden flooring” project I tackled. Buckle up, because it was a bit of a ride.

The Prep Work

First things first, I cleared out the room. Everything had to go. Furniture, rugs, that weird potted plant my aunt gave me – all of it. This gave me a blank canvas to work with, which is essential.

Next, I checked the subfloor. It was concrete, thankfully, but it wasn’t perfectly level. Nothing a little self-leveling compound couldn’t fix. I poured that stuff on, spread it around with a trowel, and let it dry overnight. It’s like magic, I tell ya – turned that bumpy mess into a smooth surface.

Getting Started

With the subfloor prepped, I unpacked the flooring. This “rubber dancing birch” stuff is basically engineered wood with a birch veneer and some kind of rubber underlayment. It’s supposed to be good for sound dampening, which is great because my kids are… energetic.

I laid out a few rows without any glue or nails, just to get a feel for the pattern and make sure I wasn’t going to end up with any weird slivers at the edges of the room. I measured everything twice (okay, maybe three times) to make sure I had enough material. Always a good idea.

The Installation Process

Now for the fun part. This flooring is an assembly type, meaning the pieces interlock. Some folks use glue, but I opted for a floating floor. I started in one corner, clicked the first two pieces together, and just kept going.

  • Click, click, click. That’s the sound of progress, my friends.
  • Tap,tap,tap. Sometime I will use a small hammer to knock the floors,ensure every piece well connected.
  • It’s kind of like putting together a giant, wooden jigsaw puzzle.

The rubber underlayment was already attached to the planks, which saved me a step. I did use a tapping block and a rubber mallet to gently persuade some of the stubborn pieces to fit together. No forcing, just gentle persuasion.

Along the walls, I made sure to leave a small expansion gap. Wood expands and contracts with changes in humidity, so you need to give it some room to breathe. I used some spacers to keep the gap consistent.

Finishing Touches

Once all the flooring was down, I installed the baseboards. This covered up that expansion gap and gave the room a nice, finished look. I used a nail gun for this part – gotta love power tools!

Finally, I cleaned up the mess. Sawdust everywhere, little bits of wood scraps, the whole nine yards. But once it was all clean, man, it looked good.

The floor really has changed the feeling of the room!

So, that’s the story of my “rubber dancing birch assembly wooden flooring” adventure. It was a bit of work, but definitely doable. And the result? Totally worth it.

Leave A Comment